Local Connection And Cloud Connection - Oilon EasyAce Operation Manual

Wireless internet connection
EasyAce - wireless internet connection ver. 2
1. Enter the Unit ID.
2. Connect your mobile device to the data hub's Wi-Fi network (instructions below).
3. Select Local connection as the connection method.
4. Connect the data hub to your home Wi-Fi network (instructions below).
5. Select Cloud connection as the connection method.
For further setup instructions, see section Setting up a heat pump connection.
Once you have entered the Unit ID, the app will download the heat pump's settings
onto your mobile device. When downloading data, your mobile device needs to be
connected to the internet. If required, download the settings beforehand in a location
where internet is available.
6.3.3

Local connection and cloud connection

If you select Local & Cloud as the connection method, the app will use either the local
Wi-Fi connection or an online connection depending on the situation.
A Local connection means that your mobile device connects directly to the data hub's
wireless Wi-Fi network. The connection can be used inside your home near the heat
pump.
When you are away, a Cloud connection is used. Your mobile device will
communicate with the heat pump through the internet.
The Cloud connection can be used only if the heat pump's data hub is connected to the
internet. Either connect a network cable to the heat pump's WAN port or connect the
heat pump to your home Wi-Fi network.
M8004 2308EN 37 (49)