Cloud Connection - Oilon EasyAce Operation Manual

A Local connection means that there is a direct wireless connection between your
mobile device and a data hub inside the heat pump. No internet connection is used.
Your mobile device connects directly to the data hub's wireless Wi-Fi network. The
connection can be used inside your home near the heat pump. From the app, select
Local connection as the connection method.
EasyAce - local connection ver. 2
Establishing a connection
1. Enter the Unit ID.
2. Connect your mobile device to the data hub's Wi-Fi network (instructions below).
3. Select Local connection as the connection method.
For further setup instructions, see section Setting up a heat pump connection.
Once you have entered the Unit ID, the app will download the heat pump's settings
onto your mobile device. When downloading data, your mobile device needs to be
connected to the internet. If required, download the settings beforehand in a location
where internet is available.
Once the download is complete, an internet connection is no longer needed (if you
intend to use only a local connection).
6.3.2

Cloud connection

If a Cloud connection is used, your mobile device will communicate with the heat
pump through the internet.
The heat pump's data hub needs to be connected to the internet. Either connect a
network cable to the heat pump's WAN port or connect the heat pump to your home
Wi-Fi network.
M8004 2308EN 35 (49)