Advertisement
Available languages
Available languages
Metal Leaves Fountain
AD99007
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO
NOT return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and
warranty information.
Carefully unpack and arrange all parts.
Locate and attach the pre-installed
Lower the top part with pump
tubing to the output of the pump.
attached in to the reservoir. Align
the cord from the pump with the
groove as shown above.
Add the decorative rocks as desired.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Printed in China
Advertisement
Table of Contents
Related Manuals for Angelo Decor Metal Leaves Fountain
Summary of Contents for Angelo Decor Metal Leaves Fountain
- Page 1 Metal Leaves Fountain AD99007 We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty information.
- Page 2 Fontaine feuilles de métal AD99007 Nous espérons que vous trouverez ces instructions utiles en assemblant votre produit. Si vous avez n'importe quelles issues avec cet article, ne renvoyez pas l'unité à l'endroit de l'achat. Veuillez visiter notre site Web www.angelodecor.com pour l'information d'aide et de garantie. Déballez soigneusement et rangez Trouvez et fixez le tube préinstallé...
Need help?
Do you have a question about the Metal Leaves Fountain and is the answer not in the manual?
Questions and answers