Angelo Decor Enzo AD96052W Quick Start Manual

Enzo Tabletop Fountain
We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT
return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty
information.
Carefully unpack and arrange all
parts.
Attach the power cord the
transformer as shown above.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
This product must be dried and stored during freezing temperatures.
Locate the pre-installed tubing and
attach it to the pump.
Flow can be adjusted using the
control dial on the front of the pump.
Place the pump inside the fountain.
Align the pump access door and
slide in place.
AD96052W
Securely attach the cable from the
light connection to the pump.
Printed in China