Angelo Decor AD93116 Operating Instructions

Valia Solar Fountain
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
The included LED light The included LED light
Arrange all pieces in Arrange all pieces in
your workspace. your workspace.
Gently lower the top Gently lower the top
in place. Align the in place. Align the
grooves and twist to grooves and twist to
l lock in place. k i l
Operating Instructions
For complete operating instructions, please see the included manual.
1. Install the included batteries.
2. Attach the included stake to the panel.
3. Fully charge the unit with the included charging cable or a minimum of 6
hours of direct sunlight.
4. Connect the pump and light to the corresponding socket s on the panel.
5. Place the panel in a location where it will obtain consistent direct sunlight.
6. Fill the fountain with clean water.
7. Turn the device on by pressing the power button.
8. Toggle the device to the desired method of operation: Direct solar or
Battery Power.
Direct Solar Power is the default method of operation. Battery Powered
operation will work for a period of up to 4 hours with a full charge.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Pass the light and Pass the light and
comes pre-installed. comes pre-installed.
pump cords down the pump cords down the
cord pipe in the bowl. cord pipe in the bowl.
Pass the power cord and Pass the power cord and
light cord down the light cord down the
pedestal and out the pedestal and out the
base. b
The final assembly should look like
this
Place the cord pipe Place the cord pipe
cover over the pipe cover over the pipe
as shown. as shown.
Align the cords from the Align the cords from the
pump and light with the pump and light with the
groove at the base of the groove at the base of the
pedestal. d t l
AD93116
Connect the tubing Connect the tubing
from the top to the from the top to the
pump. pump.
Carefully lift and Carefully lift and
lower the bowl on to lower the bowl on to
the pedestal. Align the pedestal. Align
the grooves, then
twist and lock the
bowl to the pedestal.