SOLTEK 85DRV5 Manual page 50

10. To verify that the onboard VIA LAN Controller has been set up in
system, please click "Start", then "Control Panel", then "Network".
11. In the "Network" screen, click the "Adapter" bar. You can now see
the "VIA PCI 10/100Mb Fast Ethernet Adapter is
already installed in system.
3-6-3. VIA6183 LAN driver on Win ME / 2000 / XP
1. When you newly install Windows ME , Windows 2000or windows
XP, the system will detect the LAN Controller on board and configure
it automatically into system. Therefore, user needs not bother to
install the LAN controller into these operating systems.
2. To verify the existence of VIA6183 LAN Controller and Driver, please
enter the "Control Panel" of your system and click "Network" to open
the "Configuration" screen. You can then see the "VIA PCI 10/
100MbFast Ethernet Adapter" is already installed in system.
Chapter 3 Software Setup
53