PROAIM Gripmag Assembly Manual

Car mount with magnetic gripper mechanism

Gripmag Car Mount with Magnetic Gripper Mechanism

(CM-GPMG-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

2 x Magnetic Gripper

Shoe Adapter with 3/8" Stem

Gripmag Car Mount

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the Gripmag and is the answer not in the manual?

Page 1 Gripmag Car Mount with Magnetic Gripper Mechanism (CM-GPMG-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Gripmag Car Mount Setup Assembly On Metal Surfaces  Properly tighten the Gripmag’s bottom arm attached to the camera (Not Included) twisting.  Stick the mount at the desired position on your car.  Tighten & properly secure the arms with the help of the provided flower knob of the arm.
Page 3 Position the magnetic gripper of the very arm on the glass. Make it stick to the glass by placing its other magnet to the other side of the glass.  Finally, the Gripmag car mount is properly attached to the surface of the glass.
Page 4 YOUR PROAIM GRIPMAG CAR MOUNT WITH MAGNETIC GRIPPER MECHANISM ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.

Cm-gpmg-01