PROAIM Gravita Assembly Manual

75mm camera tripod stand

Gravita 75mm Camera Tripod Stand

(TP-GVTA-01)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

3 x Feet

Bag

Proaim Gravita 75mm

Dual Stage Tripod

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the Gravita and is the answer not in the manual?

Page 1 Gravita 75mm Camera Tripod Stand (TP-GVTA-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Gravita Tripod Stand Setup • Properly spread and open all the legs of the tripod stand and attach rubber tripod shoes to the feet of the stand • Then, pull the rubber tripod shoe grip & secure it. Follow the same process to attach the remaining rubber tripod shoes.
Page 3 • The spreader can be adjusted according to the requirement by loosening the knob of the mid level spreader. Then secure the spreader tightly with the help of the knob. NOTE: It uses a mid-level spreader for significant control over the tripod footprint. •...
Page 4 • Pull the knob of the fluid head, then slide and mount the camera (Not Included), same as shown in image. • Gravita Tripod Stand Setup is ready to use.
Page 5 YOUR PROAIM GRAVITA 75MM CAMERA TRIPOD STAND ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.

Tp-gvta-01