Siemens SIMATIC NET S7-1200 Operating Instructions Manual page 47

Approvals
Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals - with the exception of the certificates for shipbuilding - have only
been obtained when there is a corresponding mark on the product. You can check which of
the following approvals have been granted for your product by the markings on the type
plate. The approvals for shipbuilding are an exception to this.
Certificates for shipbuilding and national approvals
The device certificates for shipbuilding and special national approvals can be found in
Siemens Industry Online Support on the Internet:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15669/cert)
Documents on the Internet
You will find the declarations of conformity listed below and certificates of the product on the
Internet at the following address:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/15667/cert)
You can view the considered standards in the respective certificate which is available on the
Internet at the address listed above.
Address for declarations of conformity
The EU and the UK declarations of conformity are available to all responsible authorities at:
Siemens Aktiengesellschaft
Digital Industries
P.O. Box 48 48
90026 Nuremberg
Germany
SIMATIC CM 1243-5
Operating Instructions, 01/2023, C79000-G8976-C246-06
B
47