Packaging; Storage; Disposal - SMA SMC 5000A Installation Manual

Inverter for three-phase grid feeding pv plants
Table of Contents

Advertisement

Decomissioning
Step
Instructions
7
If necessary, use an angle grinder to remove the single-use screws for anti-
theft protection.
8
Remove the Sunny Mini Central upwards, keeping it in vertical position.
9
When transporting the Sunny Mini Central,
use the ergonomic handles at the top and
bottom at the sides of the Sunny Mini Cen-
tral (A) or the housing opening by sliding a
steel bar (B) through it, for example (diame-
ter maximum 30 mm).

12.2 Packaging

If possible, please pack the Sunny Mini Central in the original packaging. If this is no
longer availagle, a similar box can be used which can withstand the weight of the Sun-
ny Mini Central (63 kg) has a handle system and can be closed fully.

12.3 Storage

Store the Sunny Mini Central in a dry place where ambient temperatures are always
between -25°C and +60°C.

12.4 Disposal

Dispose the Sunny Mini Central according to the currently applicable disposal regula-
tions for electronic waste at the installation site. It is also possible to send the Sunny Mini
Central to SMA for disposal. Shipping costs paid by sender. Mark the Sunny Mini Cen-
tral as "ZUR ENTSORGUNG" (FOR DISPOSAL"). Contact details are on page page
103.
Page 80
SMC50A_60A-11:SE3706
Remember that the Sunny Mini Central weighs 63 kg!
SMA
Technologie AG
A
B
Installation Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smc 6000a

Table of Contents