Bolting Considerations - Emerson FB1200 Quick Start Manual

Flow computer

Hide thumbs Also See for FB1200:

Table of Contents

Emerson FB1200 Flow Computer Quick Start Guide

D301786X012

June 2018

Bolting Considerations

EXPLOSION HAZARD: Ensure the area in which you perform this operation is non-hazardous.

Performing this operation in a hazardous area could result in an explosion.

If the flow computer installation requires assembly of a process flange, manifold, or flange

adapters, follow these assembly guidelines to ensure a tight seal for optimal performance

characteristics of the flow computer.

Only use bolts supplied with the flow computer or sold by Emerson as spare parts. Refer to

the figures, below, for common flow computer assemblies with the bolt length required for

proper flow computer installation.

Note

For all other manifolds, contact your Emerson Local Business Partner (LBP).

Bolts are typically carbon steel or stainless steel. Confirm the material by viewing the

markings on the head of the bolt and referencing

table, contact your local Emerson representative for more information.

Transmitter with coplanar flange

Transmitter with coplanar flange and optional flange adapters

DANGER

Table

2. If bolt material is not shown in the

Table of Contents