Leds; Switch Chassis Leds; Fan Module Leds; Power Supply Leds - Cisco Nexus 93600CD-GX Series Hardware Installation Manual

LEDs

•
•
•

Switch Chassis LEDs

The BCN, STS, and ENV, LEDs are located on the left side of the front of the switch. The port LEDs appear
as triangles pointing up or down to the nearest port.

Fan Module LEDs

The fan module LED is located below the air holes on the front of the module.
LED
STS

Power Supply LEDs

The power supply LEDs are located on the left right portion of the power supply. Combinations of states
indicated by the Okay and Fault LEDs indicate the status for the module as shown in the following table.
OK LED
Green
Flashing
green
Switch Chassis LEDs, on page 59
Fan Module LEDs, on page 59
Power Supply LEDs, on page 59
Color Status
Green The fan module is operational.
Red The fan module is not operational (fan is probably not functional).
Off Fan module is not receiving power.
FAIL or FAIL/ID
LED
Off
Off
A P P E N D I X
Status
Power supply is on and outputting power to the switch.
Power supply is connected to an AC power source but not outputting power
to the switch. The power supply may not be properly installed in the chassis.
Cisco Nexus 93600CD-GX ACI-Mode Switch Hardware Installation Guide
C
59