Turn The Zip Navigator Off; Battery Level Indicator; Unit Measurements; Distance Modes - MGI zip Series User Manual

6.3 Turn the Zip Navigator Off

Zip Navigator Battery
Please note the following points regarding the Zip Navigator battery.
Connecting the Battery onto the Zip Navigator
1. Position the battery on the Zip Navigator and push the
battery down to secure it. Push the battery handle down to
connect the battery to the Zip Navigator.
2. To turn the Zip Navigator Top Box Display off:
Hold down the Start/Stop Speed Control Button and Left Hand
Distance Mode Button for four seconds and the display will turn off
thereby disabling the Top Box.
Please note that the battery will still be connected to the Zip Navigator and will
continue to draw power whilst connected.
Please note that the Zip Navigator display will also turn off if the
Speed Control is not operated for 30 minutes.
Once again, please note that the battery will still be connected
to the Zip Navigator and will continue to drain whilst connected.
3. To reactivate the Top Box Display, whilst the battery is
connected, hold down the Start/Stop Speed Control Button and Left
Hand Distance Mode Button for four seconds and the display will turn
on, thereby enabling the Top Box.
4. To fully shut down the Zip Navigator and prevent the battery
from discharging, disconnect the battery by lifting its handle.
The battery can be left on or removed from the Zip Navigator.
6.4 Main Battery Level Indicator
Battery indication is located on the left side of the top box screen.
Four coloured bars are highlighted showing full charge. The number
of bars displayed, indicates the battery life available. You should
always check the battery status before you play golf to ensure the
main battery is fully charged.

6.5 Unit Measurements

You can change from meters / kilometres / yards / miles simply by
pressing the Unit Setting Button [on the right].

6.6 Distance Modes

There are three distance measurement modes. To move between the
modes, press the Distance Mode Button [DM] on the left.
Distance A and B: resettable distance measurements can be used to
measure how far you hit your shot and to measure how far you have
walked for the day. To reset, simply press the DM Button [left side] for 3
seconds until the reading displays "0".
Distance Total: cannot be reset as it is the odometer for the life of the
Zip Navigator. This feature will assist with service reminders which is
recommended every 500km (310 miles) or 6 month period.
MGI Zip Navigator User Manual 13