Controlling An Ri Dock - Onkyo HT-S7100 Instruction Manual

Controlling Other Components—Continued

Controlling an RI Dock

By pressing the REMOTE MODE button that's been
programmed with the remote control code for your RI
Dock, you can control your iPod in the RI Dock with the
following buttons.
For details on entering a remote control code, see
page 87.
When Using an RI Dock:
• Connect the RI Dock to the TAPE IN or GAME/TV
IN L/R jacks.
• Set the RI Dock's RI MODE switch to HDD or
HDD/DOCK.
• Set the AV receiver's Input Display to DOCK (see
page 45).
• See to the RI Dock's instruction manual for more
information.
Press the appropriate
REMOTE MODE button first
A
2
3
4
5
6
7
* With some components, certain buttons may not
work as expected, and some may not work at all.
94
A
ON/STANDBY button
Turns the iPod on or off.
Notes:
• This button does not turn the Onkyo DS-A2 or
DS-A2X RI Dock on or off.
• Your iPod may not respond the first time you
press this button, in which case you should press
it again. This is because the remote controller
transmits the On and Standby commands alter-
nately, so if your iPod is already on, it will remain
on when the remote controller transmits an On
command. Similarly, if your iPod is already off, it
will remain off when the remote controller trans-
mits an Off command.
B
TOP MENU button
Works as a Mode button when used with a DS-A2
RI Dock.
C
Arrow [
Used to navigate menus and select items.
D
Previous [
Restarts the current song. Press it twice to select the
8
previous song.
E
Rewind [
Press and hold to rewind.
I
F
Pause [ ] button
J
Pauses playback. (With 3rd generation iPod models,
it works as a Play/Pause button.)
K
G
REPEAT button*
L
Used with the repeat function.
H
M
DISPLAY button*
Turns on the backlight for 30 seconds.
I
MUTING button (48)
N
Mutes or unmutes the AV receiver.
J
ALBUM +/– button*
O
Selects the next or previous album.
P
K
VOL [ ]/[
Q
Adjusts the volume of the AV receiver.
L
MENU button*
R
Displays a menu.
S
M
PLAYLIST [
Selects the previous or next playlist on the iPod.
N
Play [ ] button
Starts playback. If the component is off, it will turn
on automatically. (With 3rd generation iPod models,
this button works as a Play/Pause button.)
O
Next [
Selects the next song.
]/[ ] and ENTER buttons*
] button
] button
] button (47)
]/[ ] buttons*
] button