Playing Your Av Components; Basic Av Receiver Operation - Onkyo HT-S7100 Instruction Manual

Playing Your AV Components

Basic AV Receiver Operation

ON/STANDBY
STANDBY ZONE 2
PURE AUDIO MULTI CH DVD VCR/DVR
PHONES
TONE
ZONE 2 OFF ZONE 2 LEVEL
1
Remote
AV receiver
controller
DVD VCR/DVR CBL/SAT
GAME/TV AUX TAPE
TUNER CD
2
3
Remote
AV receiver
controller
MASTER VOLUME
4
3
TUNING PRESET
CBL/SAT GAME/TV AUX TAPE TUNER CD SETUP ENTER RETURN
AUX INPUT
SETUP MIC VIDEO L AUDIO
MOVIE/TV MUSIC GAME DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
1
Use the AV receiver's input selector buttons to select an input source.
To select an input source with the remote controller, press its INPUT
SELECTOR buttons.
To listen to a DVD player connected to the multichannel DVD input (page 25), press
the AV receiver's [MULTI CH] button. The MULTI CH indicator will appear on the
display.
Note:
• While the multichannel DVD input is selected, the Speaker Configuration settings on
page 72 are ignored, and signals from the multichannel input are fed to the speakers
as they are.
Start playback on the source component.
To watch a DVD or other video source, on your TV, select the video input that's con-
nected to the AV receiver's COMPONENT VIDEO OUT, HDMI OUT, or MONITOR
OUT.
On some DVD players, you may need to change the digital or HDMI audio output
settings.
To adjust the volume, use the MASTER VOLUME control or the remote
controller's [VOL] button.
Since the AV receiver is designed for home theaters, it has a wide volume range for
precise adjustment. The volume can be set to Min, 1 through 79, or Max.
Select a listening mode and enjoy!
See "Using the Listening Modes" on page 57.
MASTER VOLUME
R
TX-SR606
1
3
47