Onkyo HT-S7100 Instruction Manual page 74

Advanced Setup—Continued
Double Bass
This setting is not set automatically by the Automatic
Speaker Setup function (see page 38).
With the Double Bass function, you can boost bass out-
put by feeding bass sounds from the front left, right, and
center channels to the subwoofer. This function can be
set only if the Subwoofer setting (step 3) is set to Yes,
and the Front setting (step 4) is set to Full Band in the
Speaker Configuration on page 72.
11
Use the Down [
select "Double Bass," and then
use the Left and Right [
buttons to select:
12
Press the [SETUP] button.
Setup closes.
Note:
• These settings cannot be changed while headphones
are connected or the multichannel DVD input is being
used.
74
] button to
On: Double Bass function on.
Bass from the front left and
right channels is also fed to
the subwoofer (default).
Off: Double Bass function off.
Speaker Distance
These settings are set automatically by the Automatic
Speaker Setup function (see page 38).
With these settings, you can specify the distance from
each speaker to the listening position.
1
2
]/[ ]
3
4
5
Measure and make a note of the
distance from each speaker to
the listening position.
Press the [RECEIVER] REMOTE
MODE button, followed by the
[SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
Use the Up and Down [
buttons to select "2. Speaker
Setup," and then press the
[ENTER] button.
Use the Up and Down [
buttons to select "3. Speaker Dis-
tance," and then press [ENTER].
While "Unit" is displayed, use the
Left and Right [ ]/[
select "feet" or "meters".
feet: Distances can be set in feet.
Range: 1 to 30 feet in 1-foot
steps.
meters: Distances can be set in
meters. Range: 0.3 to 9
meters in 0.3-meter steps.
]/[ ]
]/[ ]
] buttons to