Component Video Input Setup; Digital Input Setup - Onkyo HT-S7100 Instruction Manual

First Time Setup—Continued

Component Video Input Setup

If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 2, you must assign COM-
PONENT VIDEO IN 2 to the DVD input selector.
These are the default assignments.
Input selector
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
CD
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
2
Use the Up and Down [
buttons to select "1. Input
Assign," and then press
[ENTER].
3
Use the Up and Down [
buttons to select "2. Component
Video Input," and then press
[ENTER].
44
Video input
IN1
- - - - -
IN2
- - - - -
- - - - -
- - - - -
- - - - -
]/[ ]
]/[ ]
4
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[
IN1: Select if the video compo-
IN2: Select if the video compo-
- - - - -: Select if you're not using the
5
Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.

Digital Input Setup

If you connect a component to a digital audio input, you
must assign that input to an input selector. For example,
if you connect your CD player to OPTICAL IN 1, you
must assign OPTICAL IN 1 to the CD input selector.
These are the default assignments.
Input selector
DVD
VCR/DVR
CBL/SAT
GAME/TV
AUX
TAPE
CD
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
The main menu appears onscreen.
If the main menu doesn't appear, make
sure the appropriate external input is
selected on your TV.
]/[
] buttons to select:
nent is connected to COM-
PONENT VIDEO IN 1.
nent is connected to COM-
PONENT VIDEO IN 2.
COMPONENT VIDEO
OUT.
Audio input
COAX1
- - - - -
COAX2
OPT1
- - - - -
- - - - -
OPT2
]