USING THE STAND MIXER
OPERATING THE SPEED CONTROL
NOTE: The Stand Mixer may warm up during use� Under heavy loads with extended
mixing time, the top of the unit may become hot� This is normal�
Plug Stand Mixer into proper
electrical outlet� Always set speed
control lever on lowest speed to
1
start, then gradually increase speed
to avoid splashing ingredients� See
"Speed control guide" chart�
OPTIONAL ATTACHMENTS
KitchenAid offers a wide range of optional attachments such as food grinders or
pasta makers� They may be attached to the Stand Mixer attachment power shaft,
as shown here�
To attach: Turn speed control
1
to "0"� Unplug Stand Mixer�
Book.indb 13
Do not scrape bowl while Stand Mixer
is operating� The bowl and beater are
designed to provide thorough mixing
2
without frequent scraping� Scraping
the bowl once or twice during mixing
is usually sufficient�
Loosen attachment knob by turning
2
it counterclockwise� Remove
attachment hub cover�
USING THE STAND MIXER | 13
5/4/2018 7:24:27 PM