OPTIMOD-FM
Valid arguments follow the same rules for passcode entries made from the front
panel and via 8400PC:
•
Passcode length must be 1– 8 characters
•
Only alphanumeric characters are allowed (0...9 and A...Z). No punctuation
or extended characters are allowed.
•
Lower case letters included in the argument will automatically be converted
to upper case.
3. To change the IP Address:
Command
IP XXX.XXX.XXX.XXX
IP?
In the above table:
Any out-of-range or invalid characters render invalid the whole IP address that
you entered.
4. To change the Subnet Mask:
Command
SN XXX.XXX.XXX.XXX
SN?
In the above table:
Valid subnet masks are defined according to existing standards. Any out-of-
range or invalid characters render the whole argument invalid.
Response
(valid IP address)
IP: xxx.xxx.xxx.xxx entered
(invalid IP address)
ERROR. Using IP: yyy.yyy.yyy.yyy
Using IP: yyy.yyy.yyy.yyy
is the specified IP address;
XXX.XXX.XXX.XXX
is the present (or default) IP address in use.
yyy.yyy.yyy.yyy
Response
(valid subnet)
SN: xxx.xxx.xxx.xxx entered
(invalid subnet)
ERROR. Using SN: yyy.yyy.yyy.yyy
Using SN: yyy.yyy.yyy.yyy
is the specified subnet mask;
XXX.XXX.XXX.XXX
is the present subnet mask in use.
yyy.yyy.yyy.yyy
2-49
INSTALLATION
Need help?
Do you have a question about the OPTIMOD 8400 and is the answer not in the manual?