Changing The Audio Language (Multi-Language Function) - Onkyo DV-M301 Instruction Manual

Changing the Audio Language
(Multi-Language Function)
Dolby Digital, PCM, and other audio data can be
recorded on DVDs in a number of languages or audio
tracks, letting you choose the desired language or audio.
Dolby Digital
5.1CH
Audio : 1 English
POWER
AUDIO
DISPLAY
SETUP
STUP
-
FUNCTION
MEMORY
F.MEM
STOP
RETURN
1
Press AUDIO repeatedly to select the desired
language.
Pressing AUDIO once displays the currently selected
language. Subsequent presses rotates through the audio
languages available on the DVD.
Notes
• You cannot switch languages if there is only one language
recorded on the disc.
• Switching the audio language may not be possible with some
titles. In this case, the mark is displayed.
• For some titles, selection can be made using the DVD menu.
In these cases, press MENU to display the DVD menu screen
and then make your selection.
• Depending on the disc, when the audio track is changed by
pressing AUDIO, the screen may briefly pause or shake. This
is not a malfunction.
• If a DTS audio soundtrack is selected, there is no output from
the analog audio jacks.
– DVD
Dolby Digital
5.1CH
Audio : 2 Spanish
OPEN/
CLOSE
AUDIO SUBTITLE ANGLE
TOP MENU
MENU T.MNU
MULTI DIAL
+
ENTER
SELECT
DISC No. JOG MODE
DNR DISC JOG
PLAY PAUSE
STEP / SLOW SEARCH MODE
CLEAR
2 3 C
Changing Audio Type
For enjoyment of karaoke or similar format Video CDs
and CDs, it is possible to select stereo audio, or either
right or left channel mono depending on the
requirements of the source.
Audio : 1/L
Audio : 2/R
Audio : Stereo
Press AUDIO repeatedly during playback to
switch the audio type.
Audio output changes from "1/L" (Left channel) to
"2/R" (Right channel) to "Stereo".
Note
With karaoke and other discs, set the appropriate audio type for
singing and accompaniment after referring to information on the
disc jacket or accompanying material.
– Video CD/CD
45