Keeping The Disc Order And Information Updated; Inputting And Changing Text Information - Onkyo DV-M301 Instruction Manual

To performing Add. Update using controls on
the front panel
Press UPDATE on the front panel repeatedly until "Add.
Update" appears in the display window, then press the enter
button.
To proceed to the next disc without inputting
text information for the current disc
During Add. Update, if you do not want to input either
title or artist information, use the cursor control joystick
to move the cursor to "OK" and press ENTER. When
this is done for both the disc title and artist's name,
proceed with step 6 in the procedure on the previous
page. Text information can be input later using the Sub
Setup screen Text menu.
To cancel Add. Update
Press STOP 7.
When the Add. Update procedure is canceled,
information that has already been input will be stored in
memory. However, because the information is not
officially registered until the system is put in standby, if
the power cord is unplugged, or the main power to the
changer is cut, this information may be erased.
Keeping the Disc Order and
Information Updated
The changer has the ability to store information for as many
as 330 discs. After the information on the discs loaded in
the changer has been registered in the changer's memory,
even if the discs in the rack are reorganized or if as many
as 30 discs are removed from the rack, the changer will
maintain the information in memory. When the discs are
restored to the changer, regardless of order, the appropriate
information (input text information, etc.) is applied to each
disc when All Disc Update is performed.
POWER
DISPLAY AUDIO SUBTITLE ANGLE
SETUP
STUP MENU
MULTI DIAL
-
2,3
ENTER
(Cursor)
FUNCTION
MEMORY
F.MEM DNR
STOP PLAY
RETURN STEP / SLOW
1 2
4 5
7 8
RANDOM REPEAT
RDM RPT
SUB LAST CONDITION
1
SETUP MEMORY
PREVIOUS
HI-LITE SCAN
REMOTE CONTROLLER
RC- 416 DV
1
Press SUB SETUP.
2
Move the cursor control joystick to the right to
select the Auto Update menu.
OPEN/
CLOSE
TOP MENU
T.MNU
+
4
(ENTER)
SELECT
DISC No. JOG MODE
DISC JOG
PAUSE
SEARCH MODE
CLEAR
3 C
6 +10
9 0
PROGRAM
A-B PGM
PLAY
MEMORY MODE
BEST
3
Move the cursor control joystick down to
select [All Disc Update].
Custom Auto Update
Text
Add. Disc Update
All Disc Update
i
All discs in the player updated
On completion, system is turned off
Move
4
Press ENTER.
• "Auto Update" is displayed as the rack starts to
rotate as each new disc is read by the changer. It
takes between 10 and 20 seconds for the
changer to read a single disc.
• When All Disc Update is complete, the changer
turns off automatically. This is not a malfunction.
To performing Add. Update using controls on
the front panel
Press UPDATE on the front panel repeatedly until "All Update"
appears in the display window, then press the enter button.
To cancel All Update
Press STOP 7.
When the All Update procedure is canceled, none of the
updated information is retained in memory.
Inputting and Changing Text
Information
Disc titles and artist names can be input for all the discs
loaded in the changer. This information is displayed
when the disc is played and is also used when
performing searches.
Input information can be as long as 12 characters using
your choice of letters, numbers and symbols. Characters
can be input using controls on the front panel or remote
controller, and can also be directly input using a PS/2
compatible keyboard or mouse if connections are made
to the KEYBOARD/MOUSE jack on the front panel.
Notes
• The input text information is not actually stored in the
changer's memory until the power has been put in standby. If
information has been input, and the power cord is unplugged
or the main power to the changer is cut, the information may
be erased.
• Text information cannot be input for the disc in the single
loader slot.
Select
ENTER SUB SETUP Exit
continued
31