Programming Volume Unlock - One for All URC-9910 User Manual

Programming Volume Unlock

1.
2.
(x 5)
3.
SELECT
4.
or
SELECT
On the URC-9910 remote control, press and hold
SET until you see the display change from the
current device and time to [CODE SET].
Press the key five times until you see the display
change to [VOL UNLOCK].
NOTE: If you go past [VOL UNLOCK] , press the key one or
more times to return to it.
Press SELECT once to begin programming.You will
see the display change to [ALL MODE].
To unlock one mode, skip to step 4. Otherwise press
SELECT once to unlock all modes.You will see the
display change to [UNLOCKED] and then [EXIT SETUP]
as the remote control automatically exits the pro-
gramming mode and returns to normal operation.
(Optional) Press
display change to [ONE MODE].
a. Press SELECT once.You will see the display change
to [SEL MODE].
b. Press a mode key once (e.g., TV) to unlock it.
You will see the display change to [UNLOCKED]
and return to [SEL MODE].
c. If desired, repeat step 4b as needed to unlock
volume controls for other devices. Otherwise,
press EXIT to exit the programming mode.You
will see an [EXIT SETUP] message as the remote
control returns to normal operation.
(or ) once.You will see the
33