Changing Volume Lock; Locking Volume Control To One Mode (Global Volume Lock); Unlocking Volume Control For A Single Device (Individual Volume Unlock) - One for All URC-6131 User Manual

IMPK6VR manual 1.0 2/21/03 5:46 PM Page 16

CHANGING VOLUME LOCK

The One For All 6-Device PVR Universal Remote
Control is set at the factory for independent volume
control of each selected device.
However, you may change the Volume Lock setting to
Global Volume Lock so that a device's volume will be
locked to one mode (e.g., to control TV volume in all
other modes).After that, if desired, you can perform
Individual Volume Unlock on a selected device to set its
volume control for independent operation.
Locking Volume Control To One Mode
(Global Volume Lock)
1. Press and hold
blinks twice, then release
2. Enter - -
9 9 3
mode key once (e.g.,
blink twice.
3. Now, when you press
the volume of the selected device (e.g.,
will be controlled regardless of the mode
you have selected.
Unlocking Volume Control For A Single Device
(Individual Volume Unlock)
1. After performing Global Volume Lock (see
above),press a desired mode key where
you want volume to be unlocked (e.g.,
) and controlled within its own mode.
AUD
2. Press and and hold
light) blinks twice,then release
3. Enter - -
9 9 3
The LED will blink four times.
4. If desired, repeat steps 1 through 3
(of this section) for each device that you
want volume to be unlocked.
5. Now, after you select a device that has
volume unlocked (e.g.,
, , or
VOL+ VOL-
device's volume only in its own mode.
until the (red light)
SET LED
.
SET
and then press any
). The LED will
TV
VOL+ , VOL- , or Mute ,
TV
until the (red
SET LED
.
SET
and then press once.
VOL-
), pressing
AUD
, will control the
Mute
16
)