Using The Home Theater Mode; Control Organization - One for All URC-9910 User Manual

USING THE HOME THEATER MODE

The URC-9910 remote control includes a custom Home Theater
mode.After the HOME THEATER key is programmed, it will allow you
to access five groups of remote control keys without having to
change device modes. However, there are some considerations.
• Keymoved and Learned functions, as well Macros programmed
onto keys other than the dedicated macro keys (M1 ~ M3), are
affected by the Home Theater mode. If keys are moved (using
Keymover) or learned onto (using Learning) and they are placed
on keys not within the Control Groups, the keys will be ignored
when pressed.
• A Macro on the POWER key (if applicable) will carry over to the
Home Theater mode.

Control Organization

About Control Groups
For Home Theater programming, the URC-9910 remote control's
keys are grouped by type of control into the following five
control groups:
(1) Playback Controls: PLAY, STOP, FWD, REW, F.FWD, F.REW,
(2) Audio Controls:
(3) Channel Controls: CH+, CH-, (Keypad) 0 ~ 9, ENTER, LAST,
(4) Menu Controls:
(5) PIP Controls:
About Device Groups
Moreover, the URC-9910 remote control's devices are grouped into
the following five device groups:
(1) Playback Group:
(2) Audio Group:
(3) Channel Group:
(4) Menu Group:
(5) PIP Group:
PAUSE and REC
VOL+, VOL- and MUTE
SLEEP, INFO and TV/VID
MENU, GUIDE, Cursor Controls ( , , , ),
SELECT and EXIT
PIP, MOVE and SWAP
VCR, DVD, CD, CBL, SAT and RCVR/AMP
TV, VCR, CBL, SAT, DVD, CD, RCVR/AMP and
AUX
TV, VCR, CBL, SAT, DVD, CD, RCVR/AMP and
AUX
TV, VCR, CBL, SAT and DVD
TV, VCR, CBL and SAT
43
continued on next page...