DCU Tecnologic 34158000 - Smartwatch For IOS & Android User Guide

If you have any questions that this manual cannot solve, we will be happy to assist you, you can write to info@dcutec.com and in less than 24 hours we will answer you.
If you want to know a little more, go to www.dcutec.com or visit our Instagram profile @dcutec.

COMPONENT INTRODUCTION

CHARGING AND ACTIVE

Charging the device to active before first time using. To charge your device, plug the charging cable into the adapter or USB port on your computer.

INSTALL BRACELET APP "FLAGFIT 2.0"

Scan the following QR code to download and install the Flagfit 2.0 application on your Smartphone.

Equipment requirements: iOS 8 and above; Android 4.4 and above, support for Bluetooth 4.0

MAIN FUNCTION INTERFACE

1. Main interface/dial:
   Long press the touch button on the main interface to directly Switching, the dial has 5 styles
2. Access the functions of the band:
   From the main interface press on the touch button to navigate between the different functions.

FUNCTIONS

• Pedometer/Distance/Calories
  View steps, distance, calories burn in real time it can synchronize apps in time to view motion data
  
• Heart rate monitoring
  Switch to the heart rate monitor interface, heart rate monitoring, in real-time. The measurement data can be synchronized with the APP in real time with a test report
  
• Blood pressure monitoring
  Switch to the blood pressure monitor interface, to enter real-time monitoring. The measurement data can be synchronized with the APP in real time with a test report.
  

NOTE: when measuring blood pressure, please measure by correct posture. The test result is for reference only, can't be used as medical data.

• Blood oxygen monitoring
  Switch to the Blood oxygen monitoring interface, to enter real-time monitoring.
• Multiple sports modes
  Long press to enter sport mode monitoring. Running, cycling, swimming, badminton. Press and hold the sport mode to enter, click to switch, long press to start calculation, long press to stop. Press and hold the sport mode to enter, click to switch, long press to start calculation, long press to stop.
  
• Notifications/Messages push
  In the message interface, long press three seconds to view the message.
  Click to turn the page, view the message to exit or grow press three seconds to exit
  

MORE FEATURES

On the more futures interface, long press three seconds to enter Lower menu page for more operations:

• Find your phone
  Keep the phone and the fitness tracker connected normally, press and hold the touch area on your tracker. The phone will ring.
  
• About interface
  On the bracelet interface, after displaying the Bluetooth address four digits and version number
• Restore interface
  In the bracelet restore page, long press the touch key to restore the bracelet.
  
• Turn off
  On the shutdown page, long press three seconds.
  Vibration shutdown.
• Brightness adjustment page
  On the brightness page, long press the touch button to enter. The screen brightness can be chosen freely.
  
• Other feature reminders
  Reminder function needs to set the opening reminder switch on the APP side and keep the phone and bracelet in the state that the Bluetooth connection is successful, the message is a vibration reminder.
  
• Sleep monitoring fuction
  When you fall as sleep, the bracelet will automatically judge to enter the sleep detection mode and automatically detect your entire night.
  Deep sleep / light sleep / awake time, calculate your sleep quality; sleep data temporarily only view with the APP.

NOTE: sleep data will only be available when you wear the bracelet to sleep.

PRECAUTIONS

1. Don't use an adapter with a current over 2A. Charging time is around 2~3 hours.
2. Don't charge after the device was water damaged.
3. This is an electronic monitoring product, data received from it can't be used as medical basis.
4. Blood pressure testing tip:
   1. Keep your body relaxed and still while testing
   2. Keep device at the same height as your heart, and don't talk while you are testing
      

COMMON PROBLEM

1. Why is the blood pressure test not allowed?
   Blood pressure test is affected by the external environment and individual skin colour, and blood pressure monitoring is only used as Monitor blood pressure changes ans not really test or monitor blood pressure in the hypertensive patients.
   Not for use as a medical device, test data can't be used as medical data, for reference only.
2. Why can't I push caller information or content?
   1. Android QQ weChat reminder service permission to obtain
      When the user opens the QQ WeChat reminder switch for the first time, the app will get the corresponding permissions, check the program in the app to get the corresponding permissions
   2. IOS (call, SMS, QQ, WeChat) reminds service access
      When the user opens the switch (incoming call, SMS, QQ, WeChat) reminder. The conference automatically pops up the pairing request, and the user only needs to select the pairing.

Made for DCU in PRC / B55166847