Page Groups; Selecting The Desired Page Group And Page; Nav Pages; Selecting The Desired Nav Page - Garmin GNS 530 Pilot's Manual & Reference

SECTION 1
INTRODUCTION

Page Groups

Page Groups
NAV Group WPT Group
see Section 3 see Section 7 see Section 10 see Section 8
Table 1-1 Page Groups
The bottom right corner of the screen (Figure 1-14)
indicates which page group (Table 1-1) is currently being
displayed, the number of pages available within that group
(indicated by square icons), and the placement of the
current page within that group (indicated by a highlighted
square icon).
In addition to the NAV Page Group, additional page groups
are available for waypoint information (WPT), auxiliary
(AUX) functions such as flight planning or unit settings, and
listings for nearest (NRST) airports or other facilities.
Current Page Group Number of Pages in
Current Page Group
Figure 1-14 Current Page and Page Group

Selecting the desired page group and page:

Turn the large right knob until a page from the
desired page group is displayed.
Turn the small right knob until the desired page
is displayed.
1-10
AUX Group NRST Group
Position of
Current Page
within Current
Page Group
GNS 530(A) Pilot's Guide and Reference

NAV Pages

There are five pages available under the NAV Page
Group*:
• Default NAV Page
• Map Page
• TAWS Page
• NAV/COM Page
• Satellite Status Page
The Default NAV Page, the Map Page, and the NAV/
COM Page are used for most of the in-flight navigation.
Selecting the NAV Page Group and
displaying the Default NAV Page:
Press and hold the CLR Key.

Selecting the desired NAV Page:

Turn the small right knob until the desired
page is displayed.
190-00181-00 Rev. H