Configuring Dsc Settings - Garmin VHF 200 Owner's Manual

4. Enter a name.
5. Select ACCEPT
without saving the changes. Press the
Editing a Group
1. Press the DSC key.
2. Select GROUP >
3. Change the characters in the MMSI field or the Name field.
4. Select ACCEPT
without saving the changes. Press the
Deleting a Group
1. Select the DSC key.
2. Select GROUP > DELETE.
YES
3. Select to delete the entry. Select
screen.

Configuring DSC Settings

Manually Entering Position Information
If you do not have a GPS device connected to your radio, manually enter your position and
time of entry so that this information will be transmitted with DSC calls. When you enter
the position and time manually, "MANUAL POS" is displayed on the screen.
Your radio has two alarms to indicate that you need to update your position data:
• When the position data you entered manually is over four hours old, the radio beeps and
displays "DATA IS OVER 4 HOURS OLD" on the screen.
• After 23.5 hours, manually-entered position data is considered invalid. The radio
displays "DATA IS INVALID" on the screen. The radio will not transmit position data
that is more than 23.5 hours old.
See page 35 for more information on GPS alarms.
When you manually enter your position with the time, the time remains fixed at the value
you specify. The radio updates the time only if you connect a GPS device to the radio.
To enter position information:
1. Press the MENU
2. Select SYSTEM
3. For each number in the sequence, turn the Channel knob clockwise to increase the
number, and counterclockwise to decrease the number. When entering a direction
character, rotate the channel knob to switch between N or S and E or W.
VHF 100/200 Series Owner's Manual
to save your changes. Select
EDIT ENTRY.
to save your changes. Select
key.
> MANUAL GPS.
CANCEL to return to the previous screen
MENU key to return to the Home screen.
CANCEL to return to the previous screen
MENU key to return to the Home screen.
NO
to quit the action and return to the previous
Digital Selective Calling
2