Position Tracking - Garmin VHF 200 Owner's Manual

Vhf 100, vhf 200 series
Table of Contents

Advertisement

Digital Selective Calling
Receiving Position Request Calls
You can configure your radio reply automatically to incoming position requests, to prompt
you to review and approve the incoming requests before replying, or to ignore incoming
requests (see
page 28
If you enable automatic position replies, the screen displays "SENDING POSITION
CALLING" and sends your position when receiving a position request. After the call has
been transmitted successfully, the screen displays "POSITION SENT".
When receiving a position request, "POS. REQUEST FROM [VESSEL NAME or MMSI
NUMBER]" is displayed on the screen. If GPS data is available, press OK to send the
position reply. If GPS data is not available, the screen displays "NO GPS DATA. UNABLE
TO COMPLY".
Receiving Position Send Calls
When receiving a position send call (position report), "POS. SEND FROM [VESSEL
NAME or MMSI NUMBER]" is displayed on the screen with the position data. Select
to return to the Home screen.
Receiving Group Calls
1. When receiving a group call, "GROUP ROUTINE" is displayed on the screen. The radio
prompts you to change to the requested channel. If the channel request is for an invalid
channel, "INVALID CH REQUEST" is displayed on the screen.
2. Select
OK
to change the working channel.
3. Select
OK
to return to the Home screen on the new channel.

Position Tracking

When you enable position tracking, your radio uses interval position-request calls to track
up to three vessels. Regulations allow transmission of one position-request call every five
minutes. You can call up to three vessels that your radio will alternate calling at five-minute
intervals. If a vessel does not respond to five consecutive position-request calls, the vessel is
removed from the position-tracking list.
The following timetable shows the polling sequence when you have three vessels in the
position-tracking list. The radio continues to send position-request calls until you stop
position tracking by selecting EXIT.
Time
0 minutes
Vessel Polled
Ship 1
22
for more information).
5 minutes
Ship 2
10 minutes
15 minutes
Ship 3
Ship 1
VHF 100/200 Series Owner's Manual
OK
20 minutes
Ship 2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vhf 200iVhf 100iVhf100 - 25w vhf radioVhf 100 series

Table of Contents