Garmin GTR 200 Pilot's Manual
  1. Manuals
  2. Brands
  3. Garmin Manuals
  4. Transceiver
  5. GTR 200
  6. Pilot's manual

Garmin GTR 200 Pilot's Manual

Hide thumbs Also See for GTR 200:
Table of Contents

Advertisement

Quick Links

See also: Installation Manual
GTR 200/200B
Pilot's Guide

Advertisement

Table of Contents
loading

Related Manuals for Garmin GTR 200

Summary of Contents for Garmin GTR 200

  • Page 1 GTR 200/200B Pilot’s Guide...
  • Page 3 The Bluetooth word mark and logos are registered trademarks owned by ® Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. Other trademarks and trade names are those of their respective owners. Garmin is a registered trademarks of Garmin Ltd. or its subsidiaries. These ®...
  • Page 4 LIMITED WARRANTY For warranty information, visit http://www.garmin.com/en-US/legal/aviation- limited-warranty.
  • Page 5 FAA/FCC regulations. CAUTION: The GTR 200/200B display uses a lens coated with a special anti-reflective coating that is very sensitive to skin oils, waxes, and abrasive cleaners. CLEANERS CONTAINING AMMONIA WILL HARM THE ANTI-REFLECTIVE COATING.
  • Page 6 NOTE This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
  • Page 7 AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin Ltd. and its subsidiaries (“Garmin”) grants you a limited license to use the software embedded in the Garmin Product (the “Software”) in binary executable form in the normal operation of the Garmin Product.
  • Page 8 Record of Revisions Part Number Revision Date Description 190-01553-01 07/2013 Initial release 09/2013 Updated for system software 2.12 Added Key Beep volume control Added ICS MUTE ♫ 09/2014 Updated for system software 2.60. Added Cockpit Noise setting, Bass Boost setting, and Equalizer setting.

  • Page 9: Table Of Contents

    Enabling/Disabling 3D Audio: About Screen ....................... 17 ................. 17 Accessing the ABOUT Menu: ICS CONFIGURATION ....................18 ..................18 Setting the ICS Volume: ..................18 Setting the ICS Squelch: ................18 Enable/disable Pilot Isolation: Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...
  • Page 10 GTR 200/200B APPENDIX ........................19 Softkey Configuration ..................19 ..................19 Configuring Softkeys: Troubleshooting ....................20 Messages ......................21 Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 11: Description

    GTR 200/200B DESCRIPTION The GTR 200/200B is a VHF communications transceiver with a built in stereo intercom. The GTR 200/200B operates in the aviation voice band, from 118.000 to 136.975 MHz, in 25 kHz steps. Frequency Monitor Menu Standby Transfer...

  • Page 12: Controls

    When the COM radio is active, press the Power/Volume/ Squelch knob to toggle automatic squelch control On/Off for the COM radio. Power/ The GTR 200/200B radio receiver features an automatic squelch that rejects Volume/ many localized noise sources. You may override the squelch function by Squelch pressing the Power/Volume/Squelch knob.

  • Page 13: Softkeys

    Frequency Menu from the main screen. SOFTKEYS The GTR 200/200B features two User-defined softkeys. Softkeys are defined in Configuration Mode, see the Appendix for information on configuring softkeys. Softkeys can be disabled or assigned to one of the following: •...

  • Page 14: Basic Operation

    Active side with the Frequency Transfer Key . While viewing the Standby frequency display, use the LARGE and SMALL knobs on the right side of the GTR 200/200B to select the desired frequency. Turn the LARGE and SMALL knobs, clockwise to increase and counterclockwise to decrease frequency values.

  • Page 15: Adjusting Volume

    1) Press the SMALL Knob and turn the LARGE Knob to highlight USER. Or: Press the USR Softkey if configured. Or: Press MENU, and turn the LARGE Knob to highlight USER FREQ. Press the SMALL Knob to select. Skip to step 3. Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...
  • Page 16 9) Turn the SMALL Knob to tune the desired kHz value. 10) Press the SMALL Knob to accept entry. 11) Turn the LARGE Knob to highlight SAVE and press the SMALL Knob to Save. Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 17: Editing A Saved Com Frequency

    10) Press the SMALL Knob to accept entry. 11) Turn the LARGE Knob to highlight SAVE or DELETE and press the SMALL Knob to save, or delete the entry, or press the CANCEL Softkey to cancel and exit. Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 18: Accessing The Com Frequency Groups

    3) Turn the SMALL Knob to move the cursor to the desired frequency. 4) Press the SMALL Knob to tune the highlighted frequency as the Standby frequency. Press the Frequency Transfer Key to tune as the Active Frequency. Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 19: Emergency Channel

    The GTR 200/200B helps protect you from a situation where the microphone may get stuck in the ON or Transmit position. If the microphone is keyed for longer than 35 seconds, the GTR 200/200B will return to the receive mode on the selected frequency.

  • Page 20: Main Menu

    Press the MENU Key to access the Menu. Use the LARGE Knob to navigate the menu and SMALL Knob to make a selection or adjust the level. Press the BACK softkey to return to the previous screen. Menu Options Menu Scroll Location Main Menu Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 21: Media Page (Gtr 200B Only)

    2) Turn the LARGE Knob to highlight MEDIA and press the SMALL Knob. 3) Turn the LARGE Knob to navigate. Turn or Press the SMALL Knob to change or make a selection. 4) Press the BACK Softkey to return to the Main Menu. Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 22: Telephone Page (Gtr 200B Only)

    2) Turn the LARGE Knob to highlight TELEPHONE and press the SMALL Knob. 3) Turn the LARGE Knob to navigate. Turn or Press the SMALL Knob to change or make a selection. 4) Press the BACK Softkey to return to the Main Menu. Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 23: Bluetooth ® Page (Gtr 200B Only)

    GTR’s Bluetooth Name Bluetooth Page (Pairing Mode) 4) On the device you want to pair, find the GTR’s Bluetooth name in the device’s Bluetooth settings and initiate the pairing process. Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 24: Setup Menu

    HIGH setting, otherwise select NRML. • BASS BOOST (OFF/MED/HIGH) - Adds BASS boost to the music input. OFF is no boost, MED and HIGH add medium and high boost. Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 25: Accessing/Using The Setup Menu

    Active at 11 o’clock and the Standby at the 1 o’clock position. Intercom positions are processed to sound like their relative seat location. By default, the GTR 200/200B assumes the pilot sits in the left seat. Pilot seat location can be changed in configuration mode, see the GTR 200/200B Installation Manual for details.

  • Page 26: Enabling/Disabling 3D Audio

    3) Turn the LARGE Knob to navigate to COM 3D AUDIO or ICS 3D AUDIO. Turn the SMALL Knob to toggle ON/OFF. 4) Press the BACK Softkey to return to the Main Menu. Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 27: About Screen

    2) Turn the LARGE Knob to highlight ABOUT and press the SMALL Knob. 3) Press the BACK Softkey to return to the Main Menu. Unit Serial Number Software Version Number Bluetooth (BT) Software Version ABOUT Menu Number Garmin GTR 200/200B Pilot’s Guide 190-01553-01 Rev. G...

  • Page 28: Ics Configuration

    ICS CONFIGURATION The GTR 200/200B features a stereo integrated Intercom System (ICS). The GTR 200/200B may also be installed and configured for Keyed ICS operations. Keyed ICS is typically used in an extremely noisy environments, such as an open cockpit. The ICS is enabled or disabled in Configuration Mode. See the GTR 200/200B Installation Manual for installation and configuration details.

  • Page 29: Appendix

    GTR 200/200B APPENDIX SOFTKEY CONFIGURATION The GTR 200/200B features two User-defined softkeys. Softkeys are defined in Configuration Mode, see below for configuring softkeys. Softkeys can be disabled or assigned to one of the following: • PILOT PTT ( ) - Pilot Push-to-Talk can be used in place of or as a back up to a remote Push-to-Talk switch.

  • Page 30: Troubleshooting

    5) Press the BACK Softkey to exit the Softkey Setup menu. 6) Power off the unit and back on to save the softkey settings. TROUBLESHOOTING Problem Possible Cause Action GTR 200/200B does not power No power to the Check power connections, GTR 200/200B breakers, and main avionics switch...

  • Page 31: Messages

    Messages are provided as an aid in troubleshooting the radio functions. Message Description Action VOLUME KEY IS The key has been in the Contact Garmin for service if this pressed position for at message persists. STUCK least 30 seconds. This key will now be ignored.
  • Page 32 GTR 200/200B Message Description Action MULTIPLE KEYS Multiple keys have been Contact Garmin for service if this in the pressed position message persists. STUCK for at least 30 seconds. These keys will now be ignored. PILOT PTT KEY The Pilot Push To Talk...
  • Page 33 Blank Page...
  • Page 34 Salem, OR 97302, U.S.A. Garmin (Europe) Ltd Liberty House, Bulls Copse Road Hounsdown Business Park Southampton, SO40 9RB, U.K. Garmin Corporation No. 68, Jangshu 2nd Road Shijr, Taipei County, Taiwan www.garmin.com 190-01553-01 Rev. G © 2019 Garmin Ltd. or its subsidiaries...

This manual is also suitable for:

Gtr 200b

Table of Contents