Viewing Your Mmsi Number; Dsc Distress Calls - Garmin VHF 200 Owner's Manual

Vhf 100, vhf 200 series
Table of Contents

Advertisement

Digital Selective Calling
IMPORTANT: Use caution when entering your MMSI number, because you can only enter it
once. If you need to change your MMSI number after entering it, you must take the radio your
Garmin dealer for reprogramming.
To enter your MMSI number:
1. Press the
MENU
2. Select
DSC
>
MY
3. For each number in the sequence, turn the
number, and counterclockwise to decrease the number. Press the
move to the next number in the sequence. Select ab to return to a previous character.
4. Select
ACCEPT
confirm your entry.
5. Enter your MMSI number again, and select ACCEPT. If the MMSI numbers you entered
do not match, the screen displays "MMSI NUMBERS DO NOT MATCH". Select
and repeat the process. If you do not want to enter your MMSI number at this time,
select CANCEL.

Viewing Your MMSI Number

1. Press the
MENU
2. Select
DSC
>
MY
OK
3. Select
to return to the previous screen, or press the
screen.

DSC Distress Calls

When you make a DSC distress call, your call is transmitted to all DSC-capable radios
within receiving range. Your current GPS position (latitude and longitude) and the
current time are included in the transmission if you have a GPS device connected to your
transceiver. If you have manually entered your position information with the time, that
data is transmitted with the call. For information on manually updating your position
information, see
page
NOTE: Familiarize yourself with the standard distress-call format and protocol to ensure that
your calls are clear and effective.
Sending an Undesignated Distress Call
When you send an undesignated distress call, the nature of your emergency is not
transmitted to the receiving stations. Sending an undesignated distress call is a shorter and
quicker procedure that can save you time during an emergency.
1. Lift the spring-loaded door, and press and hold the
seconds. The transceiver beeps, and the screen displays "DISTRESS CALL COUNTING
DOWN". The channel pane counts down the seconds from 3 to 1.
16
key.
MMSI.
when you have entered your MMSI number. The radio prompts you
key.
MMSI.
27.
Channel
knob clockwise to increase the
MENU
DISTRESS
key for at least three
VHF 100/200 Series Owner's Manual
Channel
knob to
RETRY
key to return to the Home

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vhf 200iVhf 100iVhf100 - 25w vhf radioVhf 100 series

Table of Contents