Modifying The Operating Settings - Garmin VHF 200 Owner's Manual

Vhf 100, vhf 200 series
Table of Contents

Advertisement

Advanced Operation
Selecting NMEA 0183 or NMEA 2000
Because only the VHF 200, VHF 200i, GHS 10, and GHS 10i are NMEA 2000-compatible,
this setting is only available on those units. This setting indicates whether you are connected
to a NMEA 0183 or NMEA 2000 network. The radio can only communicate over one
network type at a time.
1. Press the
MENU
2. Select
COMMUNICATIONS
3. Select
NMEA2000
MMSI (Vessel) Filtering over a NMEA Network
Your radio can send call-related data over NMEA 0183 or NMEA 2000 when it receives
distress calls, acknowledgements to position request calls, and other position-send calls. You
can filter the MMSI numbers (vessels) for which your radio sends this data in three ways:
any MMSI number (all vessels), no MMSI numbers (no vessels), or select MMSI numbers
(vessels selected from your directory).
When you configure the radio to send data for select vessels, and you receive an
acknowledgement to a position request call or other position-send call from an MMSI
number not in your directory, your radio does not send NMEA data for that call. Distress
call information will still be sent. For more information about NMEA output from your
radio, see
page
48.
Configuring MMSI Filtering for Select Vessels
1. Press the
MENU
2. Select
COMMUNICATIONS
ALL VESSELS
to send data when you receive a call from any MMSI number, or select
NO VESSELS
to not send data for any MMSI number.
3. Select the vessel in your directory.
4. Select from the following options:
ON—the radio will send call-related data over your NMEA network when you receive
a distress call, an acknowledgement to a position request call or other position send
call from this vessel.
OFF—the radio will not send data for this vessel. Distress call information will still be
sent.

Modifying the Operating Settings

Modifying the Backlight and Contrast Settings
1. Press the
MENU
2. Select
SYSTEM
0
key.
> PROTOCOL.
or NMEA0183.
key.
>
DSC OUTPUT
key.
>
DISPLAY
>
BACKLIGHT
>
SELECT
VESSELS. You can also select
or CONTRAST.
VHF 100/200 Series Owner's Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vhf 200iVhf 100iVhf100 - 25w vhf radioVhf 100 series

Table of Contents