Advertisement
1854035
Stanton Upper Open Bookcase-CG
Parts required
A.
Top Assembly
B.
Left Side Panel
C.
Right Side Panel
D.
Bottom Panel
F.
Front Rail
H.
Connecting Bolts
1. Attach Connecting Bolts (H) Align the exposed threads on the Connecting Bolts (H) with the pre-threaded holes
in the Top Assembly (A) and Left & Right Side Panels (B, C). Tighten in a clockwise direction using the Flat Head
Screwdriver (O). See Illustration #1
2. Attach Left & Right Side Panels (B, C) Align the Connecting Bolts (H) in the Left & Right Side Panels (B, C)
with the pre-drilled holes in the ends of the Bottom Panel (D) and Front Rail (F). Be sure the dowels in the Bottom
Panel (D) align with the pre-drilled holes in the Left & Right Side Panels (B, C). Insert the Eccentric Cams (I) into
the pre-drilled holes in the Bottom Panel (D) and Front Rail (F). Make sure the groove in the Eccentric Cams (I)
faces out and the arrow points toward the Connecting Bolts (H). Use the Phillips Head Screwdriver (N) to adjust
the Eccentric Cams (I) to lock the Connecting Bolts (H) in place by turning in a clockwise direction. Cover all the
Eccentric Cams (I) with the Plastic Caps (J). See Illustration #1.
3. Attach Top Assembly (A) Repeat step 2 to attach Top Assembly to the Left & Right Panels (B, C). Insert the Flat
Phillips Head Screw (M) through the pre-drilled hole in the middle of Front Rail (F) to the Top Assembly (A).
Secure in place using Phillips Head Screwdriver (N). See Illustration #1.
Page 3 of 5
Attach Left & Right Side Panels, Top Panel
1 pc
1 pc
1 pc
1 pc
1 pc
10 pcs
Illustration #1
I.
Eccentric Cams
J.
Plastic Caps
M. Flat Phillips Head Screws
N.
Phillips Head Screwdriver
O.
Flat Head Screwdriver
10 pcs
10 pcs
1 pc
1 pc
1 pc
R1-10-12-04
Advertisement
