Related Manuals for Raycus RFL-QCW300
Summary of Contents for Raycus RFL-QCW300
- Page 1 版本号 密级 内部 阶段 标记 RFL-QCW300/3000 会签 谢良 光纤激光器英文说明书 朱超 RFL-QCW300·JS01 部 门 预研与通用技术研究部 编 写 程诗敏 20201210 受 控 校 对 姜 伟 20201211 审 核 童小龙 20201211 武汉锐科 标 审 李其军 20201214 批 准 施建宏 20201215 武汉锐科光纤激光技术股份有限公司 旧底图登记号...
- Page 2 受 控 武汉锐科 Raycus Fiber Laser User Guide RFL-QCW300/3000 Wuhan Raycus Fiber Laser Technologies Co., Ltd...
-
Page 3: Table Of Contents
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 CONTENTS 1 Safety Information ........................1 1.1 Symbols Used in This User Guide ..................1 1.2 Laser Classification ......................1 1.3 Safety Label ........................2 1.4 Optical Safety ........................3 1.5 Electrical Safety ........................ - Page 4 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 5 Warranty, Return and Maintenance ..................31 武汉锐科 5.1 General Warranty ......................31 5.2 Limitations of Warranty ....................31 5.3 Service and Repair ......................32 Appendix 1—Software Instructions ..................33 Recommended System Requirements .................
-
Page 5: Safety Information
武汉锐科 Safety Information Thank you for choosing Raycus fiber laser. This User Guide provides important safety, operation, warranty and other information. Please read it carefully before using this product. In order to ensure safe operation and optimal performance of the product, please follow the warnings, cautions, operating procedures and other instructions accordingly. -
Page 6: Safety Label
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 WARNING: Appropriate laser safety goggles must be used when operating this 武汉锐科 device. The laser safety goggles selected according to the range of wavelengths emitted from this product. The user must ensure that the laser safety goggles used protects against light emitted by the device over its entire range of wavelengths: 900nm~1100nm. -
Page 7: Optical Safety
1：Aperture Label 2：Class 4 Laser Product 3：Class 2M Laser Product Label 4：CE Compliance 5：Electrical Hazard for Guide Laser RFL-QCW300 / B / 5 / A 190101001 48VDC MAX.30A 6：Identification Plate 7：Fiber don’t Fold Optical Safety Any dust on the end of the IQB fiber connector can burn the lens and damage the laser. -
Page 8: Electrical Safety
There are no operator serviceable parts inside. All maintenance must be performed in Raycus or by qualified Raycus personnel. To prevent electrical shock, do not try to remove covers. And any tampering with the product is not within guarantee range. -
Page 9: Product Description
Please refer to the packing list accompanying the shipment to check the items included. Unpacking and Inspection Raycus fiber laser is shipped in a package designed to provide maximum protection. Upon delivery, please inspect all packages for evidence of mishandling or damage. If finding any evidence of mishandling, please save the damaged material and contact the shipping agent and Raycus immediately. -
Page 10: Operation Environment
A comprehensive packing list is sent with the laser. Check all items against the list and contact Raycus immediately if there is any missing item or evident damage to the unit. Do not attempt to install or operate the laser, if there is any evidence or suspected damage to the unit. -
Page 11: Announcements
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 c) The output terminal of the laser is connected to an optic delivery cable. Please inspect 武汉锐科 the fiber connector carefully for dust or other contamination. Use appropriate lens paper to clean it if necessary. - Page 12 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Table 3 Product Specifications 武汉锐科 Model RFL-QCW300/3000 Test Conditions Optical Characteristics Operation Mode CW/PULSE Polarization State Random 300 watts in CW Max Average Power(W) 300 watts in PULSE...
-
Page 13: Installation
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Installation 武汉锐科 Dimensions Figure 2, Figure 3, Figure 4 show dimensions of the product. Figure 2 Front view of the Laser (unit: mm) Figure 3 Rear view of the Laser (unit: mm) -
Page 14: Dimensions Of Optical Fiber Connector
Figure 4 Top view of the Laser (unit: mm) Dimensions of Optical Fiber Connector The fiber connector of Raycus RFL-QCW300/3000 fiber laser is IQB, and Figure 5 shows dimensions of the IQB fiber connector. Figure 5 IQB--Optical Fiber Connector (unit: mm) -
Page 15: Cooling Requirements
Check the optical fiber connector and clean it if necessary before installing it. This procedure must be performed by Raycus personnel or person authorized by Raycus. If any dust or something that cannot be removed from the lens is found, stop installing the product and contact Raycus immediately. - Page 16 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 During the installation and disassembly process, please take care to gently move the 武汉锐科 fiber connector, do not be shocked. g) In the process of installation the feeding fiber and fiber connector, please make sure that...
-
Page 17: Using The Product
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Using the Product 武汉锐科 Front Panel Figure 6 shows the front panel of QCW300/3000. Figure 6 Front Panel View Rear Panel Figure 7 shows the rear panel of QCW300/3000. -
Page 18: Power Connection
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 d) INTERFACE: This DB-25 interface connector is for all the control signals, including 武汉锐科 remote laser control, remote control mode setting, ready, analog control, modulation, etc. Power Connection CAUTION: ... - Page 19 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Figure 8 Control Signals Flow in the DB-25 Interface Connector Figure 9 shows the digital signal input interface circuit: Figure 9 Digital Signal Input Interface Circuit Figure 10 shows the digital signal output interface circuit:...
- Page 20 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Figure 10 Digital Signal Output Interface Circuit Figure 11 shows the 0-4V analog signal input interface circuit. Figure 11 0-4V Analog Signal Input Interface Circuit. Figure 12 shows the analog signal output interface circuit.
- Page 21 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Figure 13 Pin Number of DB-25 Interface Connector Interface wire specification The minimum wire gage is 18AWG at 15 meters (30 meters maximum regardless of gauge). The gage of the wire must increase as the distance increases. For connectivity, the wiring and/or cabling must have an overall shield to ensure proper functionality.
-
Page 22: Rs-232 Serial Port
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Table 4 ( continued ) 武汉锐科 Case Earth Direct electrical connection to laser housing Housekeeping Housekeeping, power supply for control PCB is input 4.8-5.5V Power Supply derived from this pin... -
Page 23: Operation Modes
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Figure 14 RS-232 Table 5 RS-232 pin definition Description Others Figure 15 Wire of RS-232 serial Operation Modes There are three main modes of laser operation: CW, PULSE and Wave. The main... -
Page 24: Operation Sub-Modes
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Pulse Duration & Duty Cycle vs. Peak Power 武汉锐科 Constant Average Power/ Constant Pulse Energy ， ， 10 20 30 40 50 60 70 80 90 100 Percentage of Peak Power Figure 16 PULSE mode Operational range 4.5.1... - Page 25 - ―DEABC.‖ d) Wave mode The Raycus software can reads a waveform file from the memory if a waveform has been edited and stored before (See Appendix 1.6 ―Waveform Editing‖ for more information about how to edit and store a waveform). The output power for the laser varies with the waveform...
-
Page 26: Computer Interface/Commands
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 (power curve). Emission is performed by means of the modulation signal applied to the pins 17-9 武汉锐科 of the DB-25 interface connector under the assumption that emission has been enable before. - Page 27 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Table 8 Ethernet Interface Pinouts 武汉锐科 Description Notes Transmit Data+ Transmit Data - Receive Data + Not Connected Not Connected Receive Data - Not Connected Not Connected c) Commands All commands and responses consist of printable ASCII characters.
- Page 28 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Table 9 Interface Commands 武汉锐科 Code Description Examples Sent：“ABF” Aiming Beam OFF Response：“ABF” Sent：“ABN” Aiming Beam ON Response：“ABN” Sent：“DEABC” DEABC Disable External Aiming Beam Control Response：“DEABC” Sent：“DEC” Disable External Control– Disables the external control input Response：“DEC”...
- Page 29 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Table 9 ( continued ) 武汉锐科 Code Description Examples Read Laser Temperature — Reads the internal temperature Sent：―RCT‖ of the laser. The response is an echo of the command, a Response：―RCT:34.5‖...
- Page 30 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Table 9 ( continued ) 武汉锐科 Code Description Examples Set Pulse Repetition Rate — Sets the pulse repetition rate. Sent：―SPRR 10‖ The units are in Hz. The pulse width and the duty cycle Response：―SPRR: 10‖...
- Page 31 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Table 9 ( continued ) 武汉锐科 Code Description Examples Sent: ―STA‖ Read device status status—The status is reported as a bit-encoded 32-bit word. Undefined bits or bits defined as ―Reserved‖ can be in Response: ―STA: 4100"...
- Page 32 User Guide RFL-QCW300/3000 Table 9 ( continued ) 武汉锐科 Code Description Examples Sent: ―STR‖ Read Raycus Errs—Read the private abnormal status of Raycus Laser. The status is reported as a bit-encoded 32-bit word. Response：―STR：4100‖ Normal operation Bit 0 ACDC1 Alarm Normal operation...
-
Page 33: Installation And Operation Instruction
Some alarm may occur during operation. If any alarm occurs, the ALARM light (yellow) on the front panel of the laser will light up and the laser will stop emitting and the alarm state can be displayed on ―Raycus status‖ in Raycus software homepage. The instructions and solutions of alarms are as follows:... - Page 34 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Table 10 Instructions and Solutions for Alarms of Laser 武汉锐科 Alarm Reason Solution High/Low Temperature Cooling system failure Check the fan and ventilation ducts Alarm Restart the laser, if this alarm continues to...
-
Page 35: Warranty, Return And Maintenance
The warranties start on the date of shipment from Raycus for a period of time as set forth in the applicable purchase contracts or product specifications. Raycus has the right to choose to repair or replace any product that proves to be defective in materials and workmanship selectively during the warranty period. -
Page 36: Service And Repair
All the items about warranty and service above provided by Raycus are for user’s reference; formal contents about warranty and service are subject to the contract. -
Page 37: Appendix 1-Software Instructions
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Appendix 1—Software Instructions Recommended System Requirements a) Win XP or above b) .NET 4.0 or above Installation a) Download the software package and unzip it directly: Address：http://www.raycuslaser.com/index.php/index-show-tid-53.html... -
Page 38: Running
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Running 武汉锐科 Double-click to run the software and the most common initial tasks are displayed for easy selection in Home Page. Figure 4 Home Page 1.4 System Menu... - Page 39 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Click ―open‖ and return Home Page. 武汉锐科 2) Ethernet Connection 》 》 Select Session Ethernet connect to connect Ethernet from PC host to the laser: Notice: Bofore open the software and...
-
Page 40: Home Page
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 c) Language 武汉锐科 Click ―Language 简体中文 ‖ to switch language from English to Chinese. 》 Figure 8 Language Switching d) Help Click ―Help‖ to get the current version information. - Page 41 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Click ―Read‖ to get current information of laser firmware version. Click ―Read‖ to get the laser serial number which is globally unique. Click ―Read‖ to get current clock time of the laser .
- Page 42 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Click ―DEABC‖indicate that the aiming beam ON/OFF is controlled by buttons of ―ABF/ABN‖; Click ―EEABC‖indicate that the aiming beam ON/OFF is controlled by signal applied to the pins 7-9 of the DB-25 interface connector.
- Page 43 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 c) Parameter Setting、 Reading and Emission Control 武汉锐科 The end user can get and set laser parameters like Power level, Pulse frequency, Pulse width through this part. Emission start/stop can also be performed by clicking buttons of ―Start Emission/ Stop...
-
Page 44: Waveform Edit
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 1.6 Waveform Edit 武汉锐科 a) Click ―WaveConfig‖ to enter the waveform editing page: Figure 13 Enter the Waveform Editing Page b) Steps of waveform editing: 1) Read a waveform file flash to RAM:... - Page 45 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Current Wave No.—Type the number of waveform file you want to read and if you don’t know the total number of current waveform files inside the laser you can type 0.
- Page 46 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 If the waveform file number you want to read is 3, type 3 in box of Current Wave No. and 武汉锐科 click ―Get‖ to get corresponding waveform file.
- Page 47 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 Adding new waveform requires password verification and the default password is 武汉锐科 1122334455667788. Figure 18 Editing a new waveform file by dots The waveform files are described by power and time and each dot represents power level of the laser at a certain time.
-
Page 48: Laser Configuration File
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Figure 19 Download Current Waveform to RAM Click ―Set‖ to download current waveform to RAM Figure 20 Download Current Waveform to Laser Flash Click ―Save To Flash‖ to download current waveform to laser flash. -
Page 49: Configuring The Local Area Connection For Ethernet
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 武汉锐科 Figure 23 Open configuration file c) Content in configuration file Figure 24 Content in configuration file This tag is for parameter of laser IP address setting. <IP>——... - Page 50 受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd User Guide RFL-QCW300/3000 a) Navigate to the Local Area Connection screen on your computer and click the 武汉锐科 ―Properties‖ command button. b) Select the Internet Protocol TCP/IP Setting(TCP/IP 4 on Windows) by double-clicking or click the ―Properties‖...