User Guide of RFL-P200/ RFL-P300 1 Safety Information 武汉锐科 Thank you for choosing Raycus fiber laser. This User Guide provides important safety, operation, warranty and other information. Please read it carefully before use this product. In order to ensure safe operation and optimal performance of the product, please follow the warnings, cautions, operating procedures and other instructions accordingly.
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 1.3 Safety Identification 武汉锐科 Figure 1 : Safety identification position Table 1: Safety identification English Label English Label(200W) English Label Chinese Lable Chinese Lable Chinese Lable(200W)...
There are no user serviceable parts, equipment or assemblies inside the product. All service and maintenance shall be performed by Raycus. In order to prevent electric shock, please do not break the seal or uncover the shield. Failure to comply with this instruction will void the warranty.
Please refer to package accessoriesare in the packing box. 2.3 Unpacking and Inspection Raycus fiber laser is delivered in a package, which is designed to offer the maximal safety. Upon the delivery, please inspect all packaging for evidence of mishandling or damage. If you find any evidence of mishandling, please keep the damaged material and contact the shipping agent and Raycus immediately.
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 pull the output cable when unpacking the device; and avoid any collision to the 武汉锐科 head of laser output. CAUTION: The fiber optic cable and output head are precise optic instrument, ANY vibration or impact to the output head, and twist or excessive bend to the cable will damage the instrument.
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 2.5 Attentions 武汉锐科 a) Make sure that the correct voltage of 220V AC is used. Failure to connectly connect power supply will damage the device. b) The output laser is collimated by the collimating lens, it is important to keep the collimating lens clean, otherwise it will damage the device.
Page 11
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 RR=20kHz 90-120 120-150 P=Pmax 武汉锐科 RR=30kHz 90-120 120-150 P=Pmax RR=50kHz 90-130 120-160 P=Pmax RR=50kHz Pulse turn-off time <100 P=100%~ 10%Pmax Repetition 10-50 20-50 frequency Red Guide Laser 0.1~1...
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 3 Installation 武汉锐科 3.1 Dimensions Figure 2 shows dimensions of the product.
Page 13
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 武汉锐科 Figure 2: Dimensions of 200W Product (unit:mm) The output head is QCS, the following figure 3 show the details of the QCS output head. Figure 3 QCS Output head (unit: mm) CAUTION: a) Keep the protective cap properly, prevent it from contamination;...
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 3.2 Cooling Requirements 武汉锐科 Table 4 Cooling Requirements Parameter Unit Value ≥1000 Cooling Capability Minimum Flow L/min Maximum Pressure Water-cooling pipe Pagoda-Typepipe connector, connector outside diameter 10mm Temperaturesettingof cooling water:25±0.5℃...
Page 15
Check the output head and clean it before installation. This procedure must be performed by Raycus personnel or person authorized by Raycus. f) Prevent the delivery cable from treading, pinching or excessive bending during installation.
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 武汉锐科 CAUTION: All the cables can only be connected when power supply is off. Hot plug may damage the device. CAUTION: a) Ensure that there are no fiber bends in radius less than 30cm when the product is installed.
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 2. POWER:Power Indicator, indicates that the power is switched on 武汉锐科 when the green LED illumines. 3. LASER: Laser emission button, it’s a button with an red LED indicator.
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 protective cover and a lock catch. Please use the protective cover and 武汉锐科 lock catch when not use the laser device. 2. POWER:Air switch. Controlling the on-off of AC.
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 武汉锐科 Figure 6 : The Power Cord of the Laser One end of the power cord is a plug; insert it into the socket ‘AC INPUT’ on the rear panel when using the laser.
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 武汉锐科 Table 5: SERVICE Definitions Unit Definition Comments Equivalent to front panel KEY Remote key switch SWITCH. Six and seven legs need to be INTERLOCKA short-jointed before the laser is INTERLOCKB emitted.
Page 21
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 Table 6: DB25 Control Interface Definition 武汉锐科 Function Description Data parallel transmission 8bit,D0 is the lowest level,D7 is the highest level;Range:0-255 (Hexadecimal system:0X00-0XFF); 1-8(D0-D7) Power Settings 0:Minimum power output;255:Maximum...
Page 22
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 b) Pin 17 is an external 5V power input, which supplies power to the output 武汉锐科 optocoupler of the alarm signal; the input current is more than 20mA.
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 Schematic diagram of input signal interface circuit: 武汉锐科 Figure 9: Schematic diagram of input signal interface circuit Signal input needs to be able to provide at least 7 mA of current. The schematic diagram of the output signal interface circuit is shown in Fig.
Laser Data Receiver Laser data transmitter Laser data reference Others Unconnected in suspension RS232 interface is a special interface for Raycus internal personnel debugging. 4.5 Application Steps of Laser Device 4.5.1 Pre-inspection a) Check whether the size and connection of water pipe are correct, mainly...
受 控 Wuhan Raycus Fiber Laser Technologies Co., Ltd. User Guide of RFL-P200/ RFL-P300 indicating that the main control board has been powered on), wait 10 武汉锐科 seconds and then press the laser switch (the light of the indicator indicates that the power module of the laser has been powered on normally).
The warranties start on the date of shipment from Raycus for a period of time as set forth in the applicable purchase contracts or product specifications. Raycus has the right to choose to repair or replace any product that proves to be defective in materials and workmanship selectively during the warranty period.
Raycus. The customer has the responsibility to understand and follow this instruction to use the device. Any damage caused by fault operating is not warranted.
Page 28
All the items about warranty and service above provided by Raycus are for uses’reference; formal contents about warranty and service are subject to the contract.