Install The Apc Powerchute Personal Edition Software; Back Up The Job To A Usb Flash Drive - Mircom TX3-TOUCH-UPS-KIT Installation Instructions

D.

Install the APC PowerChute Personal Edition Software

(existing installations only)
Note:
The APC software (in conjunction with the USB cable) ensures that the TX3 Touch will shut
down properly during a power outage.
1.

Back up the Job to a USB Flash Drive

Note:
1. On the main touch screen display, enter 9999.
The administrator access code window appears.
2. Enter the password to log in to the system and press OK (by default the there is no
password).
3. Insert a USB flash drive into the USB port above the On/Off switch on the TX3 Touch.
4. Select File - Backup from the Menu Bar. The Backup Jobs window appears.
5. Select Backup current job only.
6. Click Browse and choose the USB flash drive as the location to store the backup files.
7. Click Backup Now.
2. Install the APC PowerChute Personal Edition Software
Note:
1. Read the manufacturer's documentation for instructions on how to get the APC
PowerChute Personal Edition software.
2. Transfer the APC software to a USB flash drive.
3. On the TX3 Touch, select File - Shut Down - Exit to Windows from the Menu Bar.
4. Click Yes.
The TX3 Touch software shuts down and the Windows Explorer appears.
5. Insert the USB flash drive into the USB port above the On/Off switch on the TX3 Touch.
6. In the Windows Explorer, double-click the icon for the USB flash drive.
7. Double-click the exe file for the APC software.
8. Follow the instructions on the screen to install the software.
9. During the installation, you may see a Hibernation Support Warning. This is normal.
Click OK on this warning.
10. After the software has been installed, double-click the Desktop folder, then double-click
the Restart icon to restart the TX3 Touch.
If you have questions, contact us at:
http://www.mircom.com Phone: 1-905-660-4655 Toll Free: 1-888-647-2665
LT-6714 Rev 0 http://www.mircom.com
If you are installing TX3-TOUCH-UPS-KIT in an existing TX3
Touch installation, then you must install the APC software on
the TX3 Touch.
For security, back up the job to a USB flash drive.
Before you install the software, connect the uninterruptible power supply to the
TX3 Touch as described in section B on page 1.
Page 3 of 3