Features And Controls - Craftsman C950-52546-0 Operator's Manual

3
A
H
Snowthrower
A. Speed Select Lever — Allows the operator to select
forward and reverse speeds (see Figure 3). To shift,
move speed select lever to desired position.
NOTICE: Do not move speed select lever while Traction
Control is engaged. This may result in severe damage
to the drive system.
B. Auger Control Lever — Used to engage and
disengage the auger and impeller. To engage push
down, to disengage release.
C. Chute Rotation Crank — Used to rotate the discharge
chute to the left or right.
D. Deflector Control Switch — Used to control the angle
of the chute deflector (up or down).
10

FEATURES AND CONTROLS

K
B
J
I
D C G
E
F
E. Easy-TurnTM Traction Control — When engaged,
allows the operator to release one drive wheel, but
allows the other wheel to continue driving for easy
turning.
F. Free-HandTM Control — After engaging the traction
control (left hand) and auger control (right hand), allows
the operator to release the auger control lever to use the
other controls.
G. Traction Control Lever — Used to propel snowthrower
forward or reverse. Push down to engage, release to
disengage. See also, "Free-Hand Control".
H. Clean-Out Tool — Used to remove snow and debris
from the discharge chute and the auger housing.
2 2
1 1
1 2