Safety System Tests - Craftsman C950-52546-0 Operator's Manual

DANGER
Amputation hazard
This snowthrower is equipped with several mechanical
safety systems designed to keep the operator safe while
using the unit. Check the operation of these systems
regularly using the safety system tests listed. If the unit
fails to operate as described, DO NOT operate it. See
your authorized dealer for service immediately.
Test 1 - Auger/Impeller Control
With the engine running:
• Press down on the auger control lever. (The auger/impeller
should rotate)
• Release the auger control lever. (The auger/impeller must
stop within 5 seconds)

SAFETY SYSTEM TESTS

Test 2 - Traction Drive Control
With the engine running and speed control in 1st gear:
• Press down on the traction control lever. (The unit should
• Release the traction control lever. (The unit must stop)
Test 3 - Free Hand Control
With the engine running:
• Engage the auger and traction control levers, then release
• Next, release the traction control lever. (Both controls must
move forward)
the auger control lever. (Both controls should remain
engaged)
release)
9
en