Features And Controls - Craftsman C950-52123-0 Owner's Manual

FEATURES AND CONTROLS

F
SNOWTHROWER CONTROLS
A. Speed Select Lever — Allows the operator to select forward
and reverse speeds (see Figure 2). To shift, move speed se-
lect lever to desired position.
NOTICE: Do not move speed select lever while Traction
Control is engaged. This may result in severe damage to
drive system.
B. Auger Control Lever — Used to engage and disengage the
auger and impeller. To engage, push down. To disengage, re-
lease.
C. Traction Control Lever — Used to propel snowthrower for-
ward or reverse. Push down to engage, release to disengage.
B
E
A
G
D. Chute Rotation Crank — Used to rotate the discharge
chute to the left or right.
E. Chute Deflector - Manual — Used to control the angle of
the chute deflector (up or down).
F. Clean-Out Tool — Used to remove snow and debris from the
discharge chute and the auger housing.
G. Skid Shoes — Used to adjust the ground clearance of the
auger housing.
10
C
D
Figure 2