Epson Equity 386/25 User Manual page 141

The DEVICE=ERAMBIOS.SYS line must be above the
DEVICE=ANSI.SYS line in your CONFIG.SYS file to enable
the video shadow RAM function. Later, if you add other
command lines to the file, make sure that the
DEVICE=ERAMBIOS.SYS line still remains above the
DEVICE=ANSI.SYS line.
You may put the ERAMBIOS.SYS file in a directory other than
the root directory and then add the appropriate pathname to
the DEVICE= line. (For more information on adding a
pathname, see "Using Pathnames" earlier in this chapter.)
If you do not have a word processing program capable of saving
an ASCII text file, you can modify CONFIG.SYS using the
MS-DOS EDLIN utility. EDLIN is a line editing program used
to edit files that are in ASCII format. Follow the steps below to
use EDLIN to modify the CONFIG.SYS file.
1. At the MS-DOS command prompt, type the following and
press Enter:
EDLIN
You see this display:
End of input file
*
Using MS-DOS with Your Equity 386/25
4-44
CONFIG.SYS