Changing A Password In Network Server Mode - Epson Equity 386/25 User Manual

Changing a Password in Network Server Mode

To change the power-on password when you are using network
server mode, follow these steps:
1. Insert your Reference diskette in drive A.
2. Turn on or reset the computer. At the key prompt, enter
your current power-on password followed by a forward slash.
After the slash, enter the new password you want to use. For
example, if your current password is 123 and you want to
change it to ABC, type:
123/ABC
Do not use characters requiring the SHIFT key, such as $,
@, or * in your new password. The computer does not
recognize the SHIFT key when you use your password to
access the system.
The screen does not display what you type.
3-14
Using the Equity 386/25