Using Setup - Epson CW3S16 Operation Manual

Note
Note that you can bypass the memory test by pressing the
< ESC
memory on the system is quite large. You should hit the
ESC
<
screen.
Press <ESC> to bypass MEMORY test

Using Setup

Immediately after the memory test, you will get the following
prompt on the screen depending upon the type of BIOS you
have :
Press <DEL> if you
<DEL
Hit
Note
< DEL
above message is displayed
If you hit
you the option of
RUN CMOS SETUP
RUN DIAGNOSTICS
2-2
The CMOS Setup Program
> key. This option would be useful when the
> key when the following message appears on the
> key to get into the Setup Mode
> key will get you into the setup mode, only when the
<DEL>
key, a menu appears on the screen giving
want to run
on
the screen.
SETUP or DIAGS