Epson CW3S16 Operation Manual page 45

Low speed
l
Select this option is to boot your system with 8MHz CPU
speed as turning the power on.
HD controller
The system has on board IDE type HDC. If you'd like to
another type of HDC (for example, SCSI, or ESDI etc.),
disable this option and install your HDC Card to the
expansion slot on the backplane board.
Parallel port
If you use on board parallel port, set this parameter LPT1 or
LPT2. However if you want to use another parallel using
external I/O card, you should disable this parameter. The
options are:
L P T l
L P T 2
Disable
l
Serial port
You can use serial ports provided on the system mother board
by this parameter.
COMl
l
If you'd like to the on board serial port for COM l, select
this option.
COM2
Set this option if you want to use the on board serial port
for COM 2.
COMl + COM2
l
You can use two serial ports together for COM1 and
COM2 by setting this option.
2-8
The CMOS Setup Program