Epson CW3S16 Operation Manual page 116

you are ready to begin.
First, you will create several subdirectories. These will be used
shortly to contain useful files. Begin by entering the command:
C>MD DOS4
The MD command is a short form of MKDIR. This internal
DOS command creates a subdirectory under the directory you
are currently in. Since your computer boots up in the hard disk
root directory, the command you just entered created a
subdirectory named DOS4 under the root directory.
Note
If you don't understand the term "root directory" refer to
your MS-DOS User's Guide, "Files and Directories."
When the computer displays the C > prompt again, enter:
to see what you have done. You should see a directory listing
similar to the following:
Using Hard Disk
Your
6-11