Partitioning Your Hard Disk
After the DOS Shell screen appears, select the Command
Prompt option. At this point your are ready to partition your
hard disk drive. To do this, enter the command:
After loading the FDISK program, the computer will display
information, on the hard disk drive installed in the system, as
follows:
MS-DOS Version x.xx
Fixed Disk Setup Program
(C) Copyright Microsoft Corp. 19xx, 19xx
FDISK Options
Current fixed disk drive: 1
Choose one of the following:
1. Create DOS Partition or Logical DOS Drive
2. Set active partition
3. Delete DOS Partition or Logical DOS Drive
4. Display Partition information
5. Select. Next, fixed disk drive
Enter choice: [1]
Press ESC to exit FDISK
6-6
Using Your Hard Disk