Changing Your Setup - Epson CW3S16 Operation Manual

Changing Your SETUP

Before you can partition and format your hard disk, you have
to let your computer know that you have one. This is done
with the SETUP program. Once you have determined that
your hard disk is "clean," that is to say neither partitioned nor
formatted, you should enter the SETUP program.
Turn your computer on. When you see the following message,
press < DEL> key. Move the cursor to the RUN SETUP
option and press Enter. The system displays the Setup Menu.
For now, look at the information on the left side of the screen.
Hard disk C: type
6-4
Using
Your
: Not Installed
Hard Disk