4. Press any key. The DISKCOPY program copies the
contents of the MS-DOS diskette to the computer's
memory, and then you see the following:
Insert TARGET diskette in drive A:
Press any key to continue...
5. Remove the MS-DOS diskette and insert a blank diskette
(which is to be the target diskette) in drive A. Then press
any key.
If the diskette is not formatted, the DISKCOPY program
formats it. Then the program begins copying the data from
the computer's memory to the formatted diskette. When
the copy is complete, you see this prompt:
Setting Up Your System
1-16
Figure 1-9. Inserting a Floppy Disk