Safety; General; Safety Rules; Safety Features - Komatsu 930E-4SE Operation & Maintenance Manual

OM2042 7/11

GENERAL

Safety records from most organizations will show that
the greatest percentage of accidents are caused by
unsafe acts performed by people. The remainder are
caused by unsafe mechanical or physical conditions.
Report all unsafe conditions to the proper authority.
The following safety rules are provided as a guide for
the operator. However,
regulations may add many more to this list.
Read and follow all safety precautions. Failure to
do so may result in serious injury or death.

Safety Rules

• Only trained and authorized personnel may
operate and maintain the truck.
• Follow all

safety

instructions when operating
maintenance on the truck.
• When working with another operator or a person
on work site traffic duty, make sure that all
personnel understand all hand signals that are to
be used.

Safety Features

• Make sure that all guards and covers are in their
proper position. Have any damaged guards and
covers repaired. (See Operating Instructions -
Section 30, Preparing For Operation)
• Learn the proper use of safety features such as
safety locks, safety pins, and seat belts. Use
these safety features properly.
• Never remove any safety features. Always keep
them in good operating condition.
• Improper use of safety features could result in
serious bodily injury or death.
• Check the seat belt fabric, buckle and hardware
for damage or wear. Replace any worn or
damaged parts immediately.
• The seat belts must be replaced 5 years after
seat belt manufacture, or after every 3 years of
use, whichever comes first.
SAFETY
local conditions and
rules, precautions and
or performing
Fire Extinguisher And First Aid Kit
• Make sure that fire extinguishers are accessible
and proper usage techniques are known.
• Provide a first aid kit at the storage point.
• Know what to do in the event of a fire.
• Keep the phone numbers of persons you should
contact in case of an emergency on hand.

Clothing And Personal Items

• Avoid loose clothing, jewelry, and loose long hair.
They can catch on controls or in moving parts
and cause serious injury or death. Also, never
wear oily clothes as they are flammable.
• Wear a hard hat, safety glasses, safety shoes,
mask and gloves when operating or maintaining
a truck. Always wear safety goggles, hard hat
and heavy gloves if your job involves scattering
metal chips or minute materials--particularly
when driving pins with a hammer or when
cleaning air cleaner elements with compressed
air. Also, ensure that the work area is free from
other personnel during such tasks.
Safety - Section 20
Page 20-1