6
INTRODUCTION
This unit, mounted on an aluminium plate, provides a completely pre-installed sample gas conditioning
for continuous use that can be excellently integrated within gas analysis systems.
Its compact construction only takes up little space. The SS-5.. units are ready for use in a few minutes.
This makes time-consuming procurement of individual components and assembly superfluous.
7
APPLICATION
The gas conditioning and sampling system is ideally suited for both intermittent and continuous
operation.
The components of the system SS-5... are intended for "standard use." We also provide a wide range
of additional equipment and other components if special measurements are required.
Figure 1
Flow sheet of the SS-5 and SS-5/3
Gas sample probe, e.g. SP2000-H
Gas sample line, e.g. heated
Gas cooler ECP1000 or ECP3000
Fine filter FP-2T, filter element fineness 2 µm
Sample gas diaphragm pump N3KPE or N9KPE
Pre-filter PF 2
Peristaltic pump SR25.1 for continuous removal of condensate
www.mc-techgroup.com
SS-5, SS-5/3 | 1.00.01
7