Table of Contents
Advertisement
When Using a Stateless Address
Select the [Use Stateless Address] checkbox.
When Using a Manual Address
Select the [Use Manual Address] checkbox, and enter the IP address, prefix length, and default router
address.
* You cannot enter a multicast address (address starting with "ff").
When Using a Stateful Address
Select the [Use DHCPv6] checkbox.
6
Click [OK].
7
Restart the machine.
➠
The settings are applied.
Perform a connection test to check whether the IPv6 address is correctly configured.
Network Status and Settings(P. 87)
If the IP Address Is Changed after Installing the Printer Driver
●
You must add a new port.
Setting Up
Restarting the Machine(P. 105)
Adding a Port(P. 175)
74
Checking the
Advertisement
Table of Contents
