Canon MF275dw User Manual page 55

Set the time zone (UTC
*1 The UTC (Coordinated Universal Time) is a coordinated universal time that is standard for all parts of the
world. Internet-based communication relies on the UTC being set correctly.
2
On the [Current Time Set.] screen, enter the date and time, and press
➠
The time and date are set, and the Remote UI confirmation screen is displayed.
Step 3: Setting Remote UI
With Remote UI, you can use a Web browser on a computer to check the operation status of the machine, change the
settings, and perform other operations.
Set the System Manager ID and Remote UI Access PIN to prevent unauthorized access to the machine.
1
On the Remote UI confirmation screen, select [<Yes>] and press
To set the Remote UI Access PIN at a later time, select [<No>] and proceed to "Step 4: Connecting to a
Wireless LAN."
2
Confirm the message
➠
The [Remote UI Access PIN] screen is displayed.
Restrict the use of Remote UI to only those users who know the Remote UI Access PIN.
3
Enter the Remote UI Access PIN
Specify any number. You cannot set a PIN consisting of all zeros, such as "00" or "0000000."
4
Enter the PIN again
➠
After the message [Settings configured.] appears, the screen for confirming the wireless LAN connection is
displayed.
Step 4: Connecting to a Wireless LAN
Connect to the network using wireless local area network (LAN).
1
On the screen for confirming the wireless LAN connection, select [Yes] and press
● If the machine is not connected to a wireless LAN, select [No] and press
Setup Guide are applied.
● When connecting to a wired LAN, configure the wired LAN connection settings after exiting the Setup Guide.
Selecting Wired or Wireless LAN(P. 50)
2
Select the Wireless LAN connection type, and connect to the Wireless LAN.
➠
When the connection to the wireless LAN is completed, the settings configured in the Setup Guide are
applied.
When you exit the Setup Guide, the [Home] screen is displayed.
*1
) and Daylight Saving Time according to the region where this machine is installed.
Step 4: Connecting to a Wireless LAN(P. 46)
press
select [<Apply>]
Setting Up
confirm the message
select [<Apply>] press
press .
[Home] Screen(P. 112)
46
.
.
select [Yes] press
.
. The settings configured in the
.
.